Regeneration of spent organoclays after the sorption of organic pollutants: A review

Clay minerals modified with organic ions, also known as organoclays, have found applications in a wide range of organic pollution control fields because of their excellent sorption capacity towards organic pollutants. Regeneration of the spent organoclays after the sorption of organic pollutants is of great importance during their application in pollution control. In this review, the reported methods for the regeneration of the spent organoclays are summarized, including biological degradation, photo-assisted oxidation, chemical extraction/desorption, supercritical extraction, thermal desorption, et al. The characteristics and applications of these methods are briefly described. It shows that most of these methods have been developed for regenerating spent organoclays from wastewater treatment. The biological regeneration method, as an in situ, low cost and easy-operating method, is applicable for regenerating spent organoclays not only from wastewater treatment, but also from soil and groundwater remediation.     

Persistent organic pollutants (PCB, DDT, HCH, HCB & BDE) in eels (Anguilla anguilla) in Scotland: Current levels and temporal trends

Eels are an ideal biomonitor for persistent organic pollutants (POPs) because of their high lipid content, longevity and tendency to remain within a defined range during their freshwater life phase. This study investigated concentrations of POPs in eels (Anguilla anguilla) from 30 sites across Scotland, including polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (BDEs), DDT (and metabolites), hexachlorocyclohexanes (α, β, γ-HCH), hexachlorobenzene (HCB), hexachlorobutadiene (HCBD) and pentachlorobenzene. Despite its EU-wide ban ∼30 years ago, DDT and its derivatives were detected in almost all samples. PCB 153 and 138 were the most widely detected PCB congeners, while BDE 47 was the dominant BDE. Pentachlorobenzene was not detected, while HCBD was detected once only. α-HCH, β-HCH and HCB concentrations were very low (generally <3 μg/kg or below detection). When compared with 1986 and 1995 data, the results revealed considerable decreases in p,p′-DDE concentrations. More drastic reductions were evident for γ-HCH, reflecting the tightening restrictions on pesticide use imposed over the previous decades.     

A/O1/H/O2工艺处理焦化废水硝化过程的实现及其抑制

针对焦化废水中的有毒污染物会对敏感易受干扰的硝化细菌产生不利影响从而破坏硝化过程稳定性的现象,采用A/O1/H/O2工艺处理焦化废水的实际工程为研究对象,根据工程运行的水质监测数据分析,发现几种主要污染物的浓度变化会对二级好氧段的硝化过程产生抑制影响。序批式毒性抑制实验结果表明,苯酚、硫氰化物和喹啉对硝化过程具有毒性抑制作用,半抑制浓度EC50分别为34.26、278.5和73.24 mg/L。当二级好氧工艺段运行正常时（C/N约4.3/1,pH8～8.5,DO 4～4.5 mg/L）,出水氨氮浓度可低于5 mg/L,是由于焦化废水经厌氧/好氧/水解工艺后毒物浓度大幅下降,毒性得到削减,表明焦化废水生物处理A/O1/H/O2组合流化床工艺具有较强抵抗毒物抑制并实现高效的硝化作用。     

炉排炉焚烧垃圾过程中主要污染物的控制

概述了二恶英、重金属、酸性气体、灰渣等垃圾焚烧的主要污染物，以二段式（往复）焚烧炉为例，介绍了炉排炉焚烧处理工艺和污染控制设备。提出通过控制垃圾焚烧条件、尾气处理以及吸附等方法，可以有效控制二恶英类污染物的排放；重金属的控制可以用除尘器或使用相应的吸附剂处理；采用较为成熟的烟气处理技术，可以控制处理酸性气体；灰渣可采用固化稳定化或酸提取法处置。     

Crystal structure of δ-isobutoxypentabromo-cyclododecanes, kinetics and selectivity of their isomerization during thermal treatment of flame-proofed polystyrenes

Hexabromocyclododecanes (HBCDs) are persistent organic pollutants now ubiquitous in the environment. Technical HBCD mixtures and with it flame-proofed polystyrenes (FP-PS) also contain isobutoxypentabromocyclododecanes (iBPBCDs) as minor constituents, which are possibly released together with HBCDs. So far, eight diastereomeric pairs of enantiomers named as α-, β-, γ-, δ-, ?-, ξ-, η-, and θ-iBPBCDs with proportions of 10%, 5%, 2%, 21%, 11%, 11%, 12% and 28% were found in technical HBCD. Herein the crystal structure of racemic δ-iBPBCD, the second most prominent diastereomer, is presented and assigned to (1S)-1-isobutoxy-(2R,5R,6S,9S,10S)-2,5,6,9,10-pentabromocyclododecane and its enantiomer. During thermal treatment of FP-PS, e.g. the production of extruded polystyrenes (XPS), proportions of δ-iBPBCDs decrease and those of other stereoisomers increase. Evidence was found that δ-iBPBCDs isomerize stereo- and regioselectively to β-iBPBCDs. Based on structural and kinetic data, a transformation mechanism was proposed. Apparent first-order rate constants (k_iso) of 0.0019, 0.0050, and 0.012 min⁻¹ are found for the δ- to β-iBPBCD isomerization at 120, 130, and 140 °C, respectively, corresponding to half-lives of 360, 140, and 56 min. These transformations also occur during the production of XPS, which predominantly contain β-iBPBCDs, whereas δ-iBPBCDs dominate in materials experiencing lower thermal stress, e.g. expanded polystyrenes (EPS). The relative configurations of δ- and θ-iBPBCDs are TtCtCt, like the one of γ-HBCDs. γ-HBCDs are the kinetically and α-HBCDs with a TcCtCc configuration the thermodynamically favored products. In analogy, β-iBPBCDs are assumed to have a TcCtCc configuration like α-HBCDs because they are formed from δ-iBPBCDs under thermodynamic control. In conclusion, HBCD- and iBPBCD-patterns in flame-proofed polystyrenes vary substantially, reflecting the thermal stress these materials have experienced. When released to the environment, these patterns might further change, as observed for HBCDs.     

Scaling up a treatment to simultaneously remove persistent organic pollutants and heavy metals from contaminated soils

Soil washing is a treatment process that can be used to remediate both organic and inorganic pollutants from contaminated soils, sludges, and sediments. A soil washing procedure was evaluated utilizing about 100 g samples of soil that had been field-contaminated with arsenic, chromium, copper, pentachlorophenol (PCP), polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). The highest level of mobilization/detoxification was achieved in three soil washes with a mixture of 0.1M [S,S]-ethyelnediaminedisuccinate ([S,S]-EDDS) and 2% Brij 98 at pH 9 with 20 min of ultrasonication treatment at room temperature. This combination mobilized 70% of arsenic, 75% of chromium, 80% of copper, 90% of PCP, and 79% of PCDDs and PCDFs, so that the decontaminated soil met the maximum acceptable concentrations of the generic C-level criteria regulated by the Ministère du Développement Durable, de l’Environnement et des Parcs for the Province of Québec, Canada.The organic pollutants were back-extracted from the aqueous suspension with hexane. Heavy metals were virtually completely precipitated from the aqueous washing suspension with Mg⁰ particles at room temperature. The PCP was detoxified by catalytic hydrodechlorination with a stream of 5% (v/v) H₂-supercritical CO₂ that transported the organosoluble fraction through a reaction chamber containing 2% Pd/γ-Al₂O₃.In toto, this soil washing procedure demonstrates that persistent organic pollutants and selected heavy metals can be co-extracted efficiently from a field-contaminated soil with three successive washes with the same soil washing solution containing [S,S]-EDDS and a non-ionic surfactant (Brij 98) in admixture. An industrial-scale ex situ soil washing procedure with a combination of a non-ionic surfactant and a complexing reagent seems to be a plausible remediation technique for this former wooden utility pole storage facility.     

Dispersal networks for enhancing bacterial degradation in heterogeneous environments

Successful biodegradation of organic soil pollutants depends on their bioavailability to catabolically active microorganisms. In particular, environmental heterogeneities often limit bacterial access to pollutants. Experimental and modelling studies revealed that fungal networks can facilitate bacterial dispersal and may thereby improve pollutant bioavailability. Here, we investigate the influence of such bacterial dispersal networks on biodegradation performance under spatially heterogeneous abiotic conditions using a process-based simulation model. To match typical situations in polluted soils, two types of abiotic conditions are studied: heterogeneous bacterial dispersal conditions and heterogeneous initial resource distributions. The model predicts that networks facilitating bacterial dispersal can enhance biodegradation performance for a wide range of these conditions. Additionally, the time horizon over which this performance is assessed and the network’s spatial configuration are key factors determining the degree of biodegradation improvement. Our results support the idea of stimulating the establishment of fungal mycelia for enhanced bioremediation of polluted soils.     

Persistent organic pollutants in soils and sediments from James Ross Island, Antarctica

Soil and sediment samples from James Ross Island were analyzed for their PCB, OCP and PAH contents. Soil concentrations ranged between 0.51 and 1.82 ng g(-1) for seven indicator PCB congeners, between 0.49 and 1.34 ng g(-1) for HCH congeners, between 0.51 and 3.68 ng g(-1) for the sum of p,p'-DDT, DDE, and DDD, and between 34.9 and 171 ng g(-1) for the sum of 16 EPA PAHs. Sediment levels from 0.32 to 0.83 ng g(-1) were found for PCBs, from 0.14 to 0.76 ng g(-1) for HCHs, from 0.19 to 1.15 ng g(-1) for DDTs, and from 1.4 to 205 ng g(-1) for PAHs. A prevalence of low-mass PAHs, less chlorinated PCBs, and more volatile chemicals indicates that the long-range atmospheric transport from populated areas of Africa, South America, and Australia is the most probable contamination source for the solid matrices in James Ross Island.     

Instability of cytogenetic parameters and genome instability in Betula pendula Roth

The seed progeny of weeping birch (Betula pendula Roth.) have been used as a test object for monitoring the state of the environment in the city of Voronezh. An increase in the number of cytogenetic disturbances observed in the root meristem cells of birch seedlings provides evidence for genome instability in the test species.     

多沙大河的扩散示踪研究

污染物在水体中的扩散规律研究已引起越来越多人的关注。通过现场扩散示踪实验求得扩散系数，进而对污染物的扩散规律予以定量描述，是一种可靠易行的方法。对黄河托克托至河曲段的实际研究表明，以Ｃｒ２Ｏ或Ｆ－为示踪剂，运用Ｔａｙｌｏｒ模型进行多沙大河的污染物扩散规律研究可以取得满意的结果。同时，利用现场示踪实验结果与经验公式的结合可以预测不同情况下的纵向扩散系数，从而得出污染物的允许排放量，这将有利于污染物在水体中行为的深入研究。